RIT ROORKEE in Har Ki Pauri

RIT Roorkee

Conferences (Organised by Institute)

International Conference on Advances in Engineering and Technology, ICEAT-2014, May 24-25, organized by Institute of Research and Doctors (IRED) and RIT, Roorkee.



M.Tech. Dissertation Guided at Institute Campus

(Mechanical/Production Engineering)

Yatender Kumar Gupta (Batch 2013-15), "Investigation on microstructure and mechanical properties of TIG & MIG welding using aluminum alloy " (August 13, 2016).
Smriti Verma (Batch 2013-15), "Fabrication and characterization of friction stir welding using AL 3105" (August 13, 2016).
Neha Sharma (Batch 2013-15), "Effect of heat input on the Toughness and Hardness of mild steel weldment" (August 13, 2016).
Rashpal Singh (Batch 2013-15), "Dissimilar metal welding of low carbon steel and stainless steel and its analysis" (August 13, 2016).
Apurv Parashar (Batch 2014-16), " Analysis of Mechanical Properties in Coconut Coir Fiber" (August 20, 2016).
Mukesh Kumar (Batch 2014-16), " Cladding Analysis of WC-Al2O3 applied on AISI 1040 EN-steel" (August 20, 2016).
Parminder Singh (Batch 2014-16), " Influences of parameters on surface roughness and cutting rate in wire electrical discharge machining process" (August 20, 2016).
Pramod Kumar (Batch 2014-16), " Optimization and experimental exploration on EN 19 using hexagonal embodiment electrode in ECM " (August 20, 2016).
Praveen Kumar (Batch 2014-16), " Influence of SiC Microfillers on Physio-mechanical properties of Sisal/ Bamboo fiber particle based E-Glass/ Polyster composites" (August 20, 2016).
Kamal Singh Bisht (Batch 2014-16), " The Experimental Investigation of Mechanical and Tribological behaviour of glass fiber based epoxy hybrid composites materials" (August 20, 2016).
Piyush Rana (Batch 2014-16), " Non - destructive evaluation methods for composites as armours material" (August 20, 2016).
Akash Saini (Batch 2014-16), " Analysis of Mechanical Properties in hybrid natural fiber composites" (August 20, 2016).



Different Projects for B.Tech. Final year students
(Mechanical Engineering)

Vishant Saini, Abhishek and Vinit, "Solar Grass Cutter on skotch yoke mechanism" on May, 2016
Mohsin Nawab et al., " Solar Water Heating System" on May, 2016
Sachin Kr.Singh, Sumit Kr., Aniket Raj, " Effect of welding parameters on the penetration and width of weld bead" on May, 2016
Aashish pandey, Mayank Kr. singh, Rahul Sharma, "Testing on welded joints" on May, 2016
Kuldeep Bhatia, Arshdeep singh, Neelkamal, " Design and Analysis of Car Chassis" on May, 2016
Ankur Kr., Bheem Singh, Laureb Rao, "Optimisation of turning parameters using Taguchi method" on May, 2016
Bicky Kr., Suraj Kr., Vikram Kumar, " Mechanical Properties testing of wood based epoxy composites" on May, 2016
Krishna upreti, rohit patwal, rajendra bisht, "Effect of welding process parameter on material properties of welded joint of steel" on May, 2015
Saurabh rawat, shubham chopra, Gaurav kr., "Effect of heat treatment on hardness of different ferrous and non-ferrous material" on May, 2015
Amitabh Kr. Ankit, Acharya Kulshreshtha, Ankit Kr. Amitabh, "Effect of welding process parameters on the penetration and width of weld bead" on May, 2015
Abhay Singh, Lakinana Harish, Nitish kr. prabhakar, "Effect of post weld heat treatment on the impact toughness and hardness of steel weldment" on May, 2015
Vivek Samrat, Dushyant kumar, vishu chaudhary, "Effect of heat input on the weld metal toughness & hardness of mild steel weldment " on May, 2015
Bashant Kumar, Ashwani Kr.Tyagi, Ashu Saini (Batch 2013-14), Mechanical Properties Testing of Glass Fiber & Filled Epoxy based composites on June, 2014
Saurabh Chauhan, Harsh dixit, Rajat Dhiman, Design analysis of Metal Bracket by Solid Works June, 2014
Prashant Dhaundiyal, Sachine Rawat, Shubham Rathi, CNC Lathe and Milling Machine Programming June, 2014
Sourav Kr., Neela Singh, Virendra Singh Bohra, Design and Manufacturing of Spur Gear June, 2014
Mukesh Singh, Akash Dwivedi,Satendra Kr., Effect of heat treatment on Material properties of stainless steel June, 2014
Rahul kr., Lokesh Kr., Vikul Kr., Design and Development of Steering system for automobiles June, 2014
Anuj kr., Arun kr., Deepak kr., Material properties testing of Natural Fibre composite material based on jute, bamboo and coconut coir June, 2014
Abhishek Sajwan, Adarsh Joshi, Shubhi Sharma, Dinesh Negi, Vivek Palyal, Akash Singh Kharakwal, Satpal Singh (Batch 2008-12), "Optimization of a car on May, 2012
Basant S. Rathi, Eco-friendly Energy Saving Bike on June, 2011

Yatendra Gupta, Dr.Amit Tanwar and Raunak Gupta , Investigation of Microstructure and Mechanical Properties of TIG and MIG Welding Using Aluminium Alloy", IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), Vol. 13, Issue 5, Ver. VIII (Sep-Oct. 2016), pp 121-126.

Tanwer A. K., Green Supply chain management : an Environmental approach for manufacturing industry Proceedings of National Conference on Advancements and Futuristic trends in Mechanical Engineering (AFTME-2014) under TEQIP-II (MHRD, India), October 17-18, PEC University of Technology, Chandigarh, pp 134-139 (ID: AFTME-25)




International Papers :

(Mechanical Engineering)

Kumar Mohit, Tanwer A. K. and Das B., 'Optimization of casting defects in modern alloy wheel casting with quality control estimation' International Journal of Engineering and technical research, Vol.3, Issue-11, pp. 44-46, Nov. 2015, ISSN 2321-0869(0) 2454-4698(p).
Verma Smriti, Tanwar A. and Das B., Fabrication and Characterization of friction stir welding using AL 3105 , International Journal of Engineering sciences & Research Technology, Vol.4, Issue-9, pp. 691-703, Sep. 2015, ISSN: 2277-9655, Publication impact factor: 3.785.
Tanwer A. K. and Khan F., Effect of annealing temperature on toughness of low carbon steel International Journal of Civil and Structural Engineering-IJCSE, Vol. 1, Issue-3, 30 September, 2014, pp 18-21, (ISSN 2372-3971), New York, USA.

http://seekdl.org/nm.php?id=4328

Tanwer A. K., 'Effect of various heat treatment processes on mechanical properties of mild steel and stainless steel , American International Journal of Research in Science, Technology, Engineering & Mathematics(AIJRSTEM), Vol.-1, Issue -8, pp-57-61, Sep-Nov-2014, Georgia-31008, USA, ISSN(Print): 2328-3491, ISSN(Online):2328-3580,ISSN(CD-Rom): 2328-3629.(Paper ID: AIJRSTEM 14-722)
Tanwer A. K., 'Mechanical Properties testing of uni-directional and bi-directional glass fiber reinforced epoxy based composites International Journal of Research in Advent Technology (IJRAT), Vol. 2, No. 11, pp 34-39, November-2014, INDIA,(Impact factor by ISRA-1.473) (E-ISSN: 2321-9637), (Paper ID: 211201416) http://www.ijrat.org/downloads/nov-2014/paper%20id-211201416
.pdf
Tanwer A. K., 'Effect of various heat treatment process on tensile strength and elongation of stainless steel", American International Journal of research in Science, Technology, Engineering & Mathematics (AIJRSTEM), vol.-3, issue-8, pp-195-199, sep-nov-2014, Georgia-31008, USA, ISSN(Print):2328-3491,ISSN(Online): 2328-3580, ISSN(CD-Rom): 2328-3629.(Paper ID: AIJRSTEM 14-793)
Tanwer A. K., 'Effect on Mechanical Properties for Jute, Coir and Bamboo natural Fiber reinforced epoxy based composites", American International Journal of Research in Science, Technology, Engineering & Mathematics (AIJRSTEM), vol.-1, Issue-8, pp-41-45,sep-nov-2014, Georgia-31008, USA, ISSN(Print): 2328-3491, ISSN(Online): 2328-3580, ISSN(CD-Rom): 2328-3629.(Paper ID: AIJRSTEM 14-717).
Tanwer A.K. and Khan F., Effect of annealing temperature on toughness of low carbon steel Proceedings of International Conference on Advances in Engineering and Technology, ICEAT-2014, May24-25, organized by Institute of Research and Doctors (IRED), New York, USA at RIT, Roorkee, pp.260-263, ISBN:978-1-63248-028-6 doi: 10.15224/ 978-1-63248-028-6-03-51.(Published on line on iSEEK Digital Library http://seekdl.org/nm.php?id=3734).




Professional-Trainings/workshop

(Department of Mechanical Engineering)

National level biggest 'Vehicle Dynamics' workshop cum championship in association with wissenaire IIT Bhubaneswar organized by Department of mechanical engineering, Roorkee institute of technology, Roorkee on dated Oct. 9-11, 2015.
National level biggest 'Quadcopter' workshop cum championship in association with wissenaire IIT Bhubaneswar organized by Department of mechanical engineering, Roorkee institute of technology, Roorkee on dated Oct. 7-8, 2015.
Conducted an MECH-E-MANIA 2014, AUTOMOBILE WORKSHOP held on March 1-3, 2014 at Roorkee Institute of Technology, Roorkee.
Two Days Workshop of Faculty Development & Practical orientation programme-2013, (FDPOP-2013) conducted by Deptt. of Mechanical Engg., Roorkee Institute of Technology, Roorkee from 31-10-2013 to 1-11-2013 for enhancing the Practical efficiency of Faculty of Department and activity related to manufacturing process such as Arc & Gas welding, Lathe machine operations, Drilling, Shaping, Forming, Rolling, Wire drawing, press work, Injection Moulding & Material Testing operations have been practiced.
Conducted an MECH-E-MANIA 2013 AUTOMOBILE WORKSHOP held on January 5-7, 2013 at Roorkee Institute of Technology, Roorkee.

(Electrical Engineering)

Neha Shukla, Analysis and Design of Matrix Converters for Adjustable Speed Drives and Distributed Power Sources .
Rahul kumar goyal, Fault Analysis in Transmission Line using Matlab .
Vishal Verma, Speed Control of Induction Motor Drives using Matlab .

(Civil / Structure Engineering & Construction)

Kajal Goel ( Batch 2013-15), Influence of masonry infill walls on seismic performance of RC framed structures- A comparison of ACC and conventional brick infill (August 20,2016)
Manshi Aggarwal ( Batch 2014-16), Study on mechanical properties of cement mortar by the addition of ureolytic bacteria (August 20, 2016)
Ayush Goel ( Batch 2014-16), Study on fiber reinforced concrete by using glass fiber ( August 20 2016)
Shravan Kishor Gupta (Batch 2014-16), Seismic hazard assessment of Uttar Pradesh ( August 20, 2016)
Ankit Gautam ( Batch 2014-16), Earthquake resistant structures & their testing techniques ( August 20, 2016)
Akansha Tiwari ( Batch 2013-15), Analysis and development of sustainability initiative of recycled concrete waste by aggregate replacing method ( August 20, 2016)
Syed Intikhab Zia ( Batch 2013-15) , Use of fiber concrete in bridges deck slab ( August 20, 2016)
Arvind Kumar ( Batch 2014-16), Replacement of cement in concrete with Rice husk ash ( August 20, 2016)
Amit Kumar Tomar (Batch 2014-16), Utilization of waste marble powder in self-compacting concrete (August 20, 2016)
Janak Panwar ( Batch 2014-16), Effect of Nano silica on the compressive strength of concrete ( August 20, 2016)
Vikas Tyagi ( Batch 2014-16), Economical and effective seismic retro fitting techniques of existing structures (August 20, 2016)

Guest Lectures
Seminars
Convocation
Alumni Meet
Social
Technical
Research
Sports
Cultural
Funzone
Industrial Visits/Tours

Downloads
Virtual Tour
Download Prospectus
Online Registration
Students Area

Our Major Tie-Ups
Microsoft, IBM, TCS, and Autodesk