What are the three major problems of infusion pumps

The three major problems faced by an infusion pump made by Infusion Pump Manufacturers are

Software problems:

A software error message is shown, asserting that the pump is unworkable. This happens in the deficiency of a recognizable problem.
The infusion pump construes a solitary keystroke as numerous keystrokes (a problem called a key bounce ). For instance, the user programs an infusion degree of 10 mL/hour, but the device records an infusion rate of 100 mL/hour.

Alarm faults:

The infusion pump flops to produce a distinct alarm for a dangerous problem, such as an obstruction (e.g., compressed tubing) or the attendance of air in the infusion tubing.
The infusion pump produces an obstruction alarm in the lack of obstruction.

Insufficient user interface design ("human aspects" issues):

The plan of the infusion pump screen muddies the user, or the infusion pump does not retort as it must (i.e., with a warning or alarm) when unsuitable data is entered.

The infusion pump monitor doesn t make clear which elements of measurement the user is projected to enter. For instance, the user may enter weight in pounds when the infusion pump needs it in kilograms.
Pump labels or apparatuses become injured under routine use. For instance, scrubbing the pump made by Infusion Pump Manufacturers, as the user-maintainer trusts is satisfactory practice, may damage the pump, making it untrustworthy for medical use. Users with long fingernails may harm the print on the pump keys, making them illegible.

User directions or signals for mechanical set-up are not exact or clear enough. For instance, an instruction to confer a tubing set in all obligatory tube holder clips before closing the pump s access door may be blurred, subsequent in compressed tubing and under-infusion.